Then adjust the MR55 to information the MR55s base slot to the cradle’s bottom tab until it clicks into place. at the time set up, the MR55 need to be secured to your cradle through the use of one of many provided screws within the cradle’s bottom tab.
When the access issue detects a radar signal on precisely the same channel it is actually broadcasting on with its five GHz radio, the entry level will then get action so it will not likely interfere Using the radar one. There are several techniques the AP will take any time a DFS occasion takes position.
Warning: due to heat dissipation in the back of APs during standard operation, make sure you never stack driven on APs in addition to one another all through pre-installation in order to avoid warmth damage.
Physically hook up the unit for the local community hook up the RJ45 ports to existing infrastructure to deliver electric power and an uplink
The MR55 could be placed on a desk or shelf resting over the non-scratch rubber ft. The mount cradle is not really necessary for a desk or shelf set up.
The unit is not able to productively communicate with the Dashboard Cloud servers or there might be a hardware problem With all the machine. Check the local standing site on the device to confirm the position. If vital, contact Meraki aid For added support.
Examine LEDs the ability LED should be solid green (or blue, if consumers are connected). If it is flashing blue, the firmware is automatically upgrading and the LED need to flip green in the event the enhance is done (Commonly inside of a few minutes). begin to see the "LED Indicators" area For additional details. .
When employing DHCP, the DHCP server must be configured to assign a static IP deal with for each MAC handle belonging to the Meraki AP. Other characteristics of your wireless community, for instance 802.1X authentication, may possibly depend upon the property that the APs have static IP addresses.
The mount cradle has various hole designs which are custom made for every set up state of affairs. The mounting template (involved inbox with mount cradle) needs to be accustomed to drill holes for wall mounts and in addition to recognize the proper gap designs inside the mount cradle that should be utilized for Every style of mount.
Configure the static IP address, Internet mask, gateway IP handle and DNS servers that this AP will use on its wired link.
To launch the MR55 from your mount cradle, initially eliminate the safety screw that secures the MR55 on the cradle’s base tab.
Tip: Pre-assemble rubber spacers and screws on the mount cradle. The mount cradle can then be held with one hand when the other hand holds a screwdriver. If mounting your MR55 to a dropped ceiling, skip on the "electric power the MR55" portion.
The MR55 mount cradle can be employed to set up your access issue in an array of eventualities: wall or solid ceiling, under a fall ceiling, on different electrical junction bins.
a great mounting spot is important to getting the greatest overall performance out of the MR55 accessibility place. continue to keep the following in your mind:
If getting used inside a mesh deployment, the MR55 ought to have line of sight to no less than two other Meraki products. A Cisco associate might help make website sure your AP placement is ideal.